Category: Resources

The roofing sector has seen many developments of late. This comes in a period where the market is showing a good recovery from the post-2008 era. In fact, many experts state that although BREXIT had some impact on the industry in general, there seem to be lots of optimism in the sector.

Like other contractors, roofers have to keep up with the changes in order to remain relevant in the industry. This means acquiring newer skills, coming up with better innovations, and using the latest technologies.

One area that seems to receive lots of interest is the “Green” roof sector. Consumers, as well as industry experts, are vouching for more energy efficient and non-polluting solutions to their roofing problems. Gone are the days when asbestos was the main materials. Nowadays you will hardly come across any asbestos roof.

Instead, what you get are roofing materials made from recycled and renewable materials. They provide better cooling, which reduces the reliance of heating, and cooling systems, don’t emit any toxic compounds and also don’t have any negative effects on the people, pets, and the environment.

Another form of “Green roof” is the creation of gardens and greenhouses on the rooftop. This is particularly noticeable on flat roofs and the main goal is to create a biodiversity surrounding that enhances the ambiance in the roof. Plants, as we know, have good insulation properties that if used right will help conserve energy and power. It also creates a natural habitat for wildlife including birds and butterflies.

According to a report by the National Federation of Roofing Contractors (NFRC), more and more contractors are embracing this new ideology. They will train their employees on the basic principles and ensure to stick to the regulations of the Green Roof Code of practice (GRO).

Nevertheless, Britain seems to be lagging behind in comparison to its neighbors like the Scandinavian Countries and German where the green roofs contribute to about 10% of the roofs. London leads lead the pack of cities adopting green roofs and accounts for approximately 42% of the green roofs in Britain. Other regions, nevertheless, are slowly but steadily picking up the pace.

Another area that has contractors and the industry in general concerned is the widening skill gap. There are more older people in the industry compared to the younger people. And with many of the senior people retiring, the industry faces a shortage of skills. This problem is further worsened by the boom in the construction industry that requires more contractors.

Statistics show that the industry requires about 44,430 new recruitments every year and the number will increase to over 46,000 by end of 2018. The supply, however, is far less meaning that the shortage will continue to be felt. Due to the looming shortage, some contractors are opting to seek services from beyond the borders.

A survey carried out back in 2014 by The Federation of Master Builders indicated that 20% of service seekers faced challenges when recruiting for skilled labor. The reason was that there was a shortage in seasoned bookers including roofers. The ones they found were not very skilled and lacked the desired hands-on-experience.

The skills gap is also evidenced by the rising day wages where in some regions; a skilled person can earn over £250 daily. This is similar to some leading white-collar jobs.
While the high prices are good for the industry, the shortage of skilled roofers isn’t.

The Markit/CIPS UK Construction PMI says that the demand for subcontractors is in an all-time high. This is pushing the wage rate higher and at the same time putting pressure on the few available contractors.

Sadly, the end user, who is the service seeker, has to dig deeper into the pocket to get the service. Some, who find the prices a bit too much, may be forced to seek shoddy services from less-experienced or incompetent contractors. This may look economical in the short run but may ruin the good reputation of the existing contractors.

It is, therefore, necessary to come up with long-lasting solutions. A good approach is trying to market the sector and offer incentives for the younger generation. Many leading firms are playing an active role in not only marketing the roofing sector but also taking part in recruiting and training young people. The number of apprenticeships has increased to narrow down the gap.

bmroofers.co.uk

There are many types of commercial roofs in Birmingham. In fact, newer types are being discovered, while older types are making a comeback. However, what may look good in your eyes or suitable for your premises may not offer the required service. It may start to disintegrate due to the nature of operations, may undermine the functionality or beautiful appeal of the structure, or may be complicated to fit in your building. Rather than installing, a roof and later realizing later that it does not serve its purpose properly, you are always advised to engage a professional and competent roofer. This will save you time, effort, money, and associated stresses. The following are the different options of commercial roofing available in Birmingham.

1. Flat Roof
This has to be the most common roofing for commercial buildings. It has been around for many centuries and continues to draw a huge following. The roof does not comprise a ridge that connects two sections. Instead, it comes in a flat piece with one side slightly raised than the other. This allows rainwater, dust, dirt, leaves and other things to fall to the ground. It is made of different materials but the most common are iron sheets, tiles, bituminous rubber, EPDM and more.

The advantages of the flat roof are that it’s easy to install, requires minimal maintenance, takes little space, and is cost affective. However, it isn’t very noticeable especially if the slope or incline is little. It also can be hard to install in a very large building and will require a strong support framework. NB: Choosing the right pitch or slope is critical when selecting a flat roof. Too shallow and rain water, animal excrements, bird droppings, leaves, grass clippings may remain on the roof for too long.

2. Metal Roof
Metal roofing is also common in Birmingham and is used in both commercial as well as residential applications. It has been around for centuries and is liked for its simplicity, sturdiness, and durability. The earliest types were made of materials such as lead, bronze, and copper. However, the materials were prone to corrosion and rust. Later on, materials including aluminum, stainless steel, and galvanized steel became the preferred choices. Galvanized iron is the most common covering material that is used. It outscores the other options in regards to its lighter weight, better resistance to corrosion and rust, and handles different environmental factors quite well.

Nevertheless, the popularity of this roofing is declining as people go for more energy efficient roofs. It is also more expensive than other cheaper options like plastic. The main pros of the roof are easy installation, long lasting, affordable, and require less labour to install. The cons are that it produces more noise during the rains, it is not super strong, and isn’t the most attractive.

3. Bituminous Roofing Systems
Bituminous is commonly used on flat commercial roofing. The material is used as a substitute for galvanized iron, aluminum, tiles, zinc, and other materials. The material comes in different designs to suit various needs. You will come across long strips that come in form of rolls, short square /rectangular pieces, modified bitumen as well as hybrid. To lay the roofing system, Birmingham roofers also incorporate other materials such as self-adhering membranes, cap sheets, and base sheets. For extra strength and longevity, modern types are reinforced with ply sheets (organic mats) or glass-fiber mats.

key merits of bituminous roofing are that it is energy efficient and will absorb the heat to create a nice warm interior, it doesn’t produce noise in windy environments or heavy downpour has good resistance to high puncture, and has good waterproofing and weatherproofing characteristics. The main demerits are that it is a little technical to install and is heavier than some other options.

4. Single Ply Roofing (SPR)
Single ply type of roof comprises flexible sheets made from compounded synthetic materials. The main categories are thermoplastics and thermosets, both of which are manufactured in strict environments to ensure they are eco-friendly and safe for human beings. Thermoset membranes comprise of rubber polymers (with Ethylene Propylene Diene Monomer (EPDM). Thermoplastic membranes are compounded from polymers and will become hard when it is cold and soften during the hot days.

They are highly flexible and can be fitted in tight spaces or corners with ease. They also have good impact resistance and can handle the harsh environments well. When properly installed by a competent roofer, they will last for many decades and do not require frequent maintenance. Versatility, strength, durability, attractiveness are some of the advantages of this roofing type. Some consumers, however, say that they are not completely green and are heavy.

5. Plastic Roofing
This roofing type is becoming more popular by the day. Credit goes to the discovery of better materials and the invention of superior technology. Generally, plastic is very light meaning it will place lesser strain and weight on the structure. The building will, therefore, suffer from lesser wear and tear. The bonds between the plastic materials are also stronger and this leads to a waterproof and weatherproof roof. Common forms of plastics include Polyvinyl chloride (PVC), thermoplastic polyolefins (TPO), and alloys of PVC.

Advantages of plastic roofing are that its lightweight, easy to install, creates tough bonds, aesthetically appealing, and is easy to repair. The disadvantage is that they can crack or break if stepped on too frequently. Also, some forms of plastic will fade over time.

About Us
We  take pride in offering the best services in regards to roofing in Birmingham. We have been in operation for many years and pride in not only being a leader but among the reputable roofers in the region. Our company boosts experienced and dedicated roofing experts who will deliver nothing but the very best. These include new installation, repairs, and maintenance of commercial roofing. We work with leading firms to ensure you get quality, reliable and long lasting. To learn more about our company and the kinds of services we offer, visit our website at bmroofers.co.uk. You can also get in touch with us by sending an email or calling one of our representatives.

Repairs, Reroofing and Using the Right Company

The most imperative piece of your home or building is the rooftop over your head. It ensures you, your business and your belongings and can upgrade the excellence of your property. That is the reason you need to verify that it is appropriately kept up and repaired.

This can be used as a guide to future proof yourself against any of the common pitfalls of Roofing services

If Your rooftop isn’t lasting. It needs some love and guidance! Roofs are like a fine wine . You can give it that care by recognising what issues to search for and how and when to get proficient help.

Again and again it is underestimated that as long as a rooftop is keeping you nice and dry, it must be in great condition. That isn’t really so. That is the reason you need to make a move currently to help guarantee a long life for your roof.

The most ideal route for you to limit rooftop repair bills is to anticipate harm before it happens. This implies occasional examinations, either from the beginning on a stepping stool. In the event that you choose to assess the rooftop from a stepping stool, take after these wellbeing tips: review the step, rungs and rails for harm before utilising it; ensure the step is on strong, level ground; secure the stepping stool at the best to keep it from slipping; broaden the step no less than three feet over the edge of the rooftop, and edge it 1 foot back for each 4 feet in eave tallness; and dependably utilise the two hands when climbing the step.

While examining from your ladder, search for threat signs like: absent or split tiles or slates, obstructed canals and guttering, extreme weathering, twisted shingles or exhausted roofing materials. Inside, you’ll need to check for holes or moist regions and stains on roofs.

As a rule, a more up to date structure ought to be investigated every year while a rooftop that is eight to ten years of age ought to be examined all the more frequently. In the event that you can’t securely influence an assessment yourself, to have a roofing temporary worker do it for you. The cost is sensible, and it could counteract later pointless repairs.

Common Roof Repair Work

Repairing a rooftop is a genuine business. The best possible repair of current roofing frameworks as often as possible requires particular information, the use of new innovations and very particular abilities. It in this way can’t be over-underlined that repairs should just be attempted by an expert roofing contractual worker who knows how best to manage the current issue.

On the off chance that your rooftop is generally new and has grown just a minor break, regularly it tends to be effectively remedied. Roofing that has been harmed or has overwhelmed can be supplanted, and spills around flashings can be repaired.

In the event that there is any harm done to the rooftop by storms, hail, flying trash, or by other tradesmen taking a shot at your finished rooftop, you ought to tell your roofing temporary worker quickly.

Keep in mind that this level of harm, if dismissed, will just deteriorate. A disregarded rooftop can make a slightly damaged roofline turn into absolute disaster and rainwater pouring in – potentially even basic problems turning into highly expensive jobs.

When Do we Need a Completely New Roof?

On the off chance that your rooftop is destroyed or if repair costs are over the top, reroofing is the best arrangement. Most urban communities and regions in the Birmingham Area have embraced reroofing codes to characterise particular prerequisites important to reroof a structure. All equipped roofing contractual workers know about and consent to these codes.

While reroofing, the state of the rooftop structure and its backings ought to be examined for harm and repaired as required. Shrouded harm or dry decay not perceptible at the season of assessment may result in extra cost to the proprietor. It might likewise be important to fortify the rooftop structure to help the new rooftop, particularly in the event that you are thinking about supplanting a lightweight roofing material, for example, slates, with a heavier roofing material like a solid concrete tile.

Getting the right Insulation

Amid a roof work, you have a one of a kind chance to include a protecting material that will seal the warmth of your home in. Since the vast majority of your escaping heat happens through the rooftop, including this protection will spare you cash on your utility statements.

Why Use a Professional Contractor?

The most imperative piece of keeping up your rooftop is to take care of business right the first run through. This is the place an authorised, guaranteed roofing contractual worker comes in. He is the professional – somebody who will convey a compelling, dependable rooftop and remain behind his work.

An authorised roofing worker has an extensive variety of abilities. He will take responsibility wherever waterproofing is required. He knows a wide range of roofing and can suggest the best application for your specific need. He should also cite a reasonable cost before he begins to work.

Regardless of whether they work extensive or independent ventures, proficient roofing temporary workers all have the accompanying attributes in like manner

The best roofing contractual worker is just in the same class as the laborers who introduce the rooftop framework. Proficient roofing contractual workers put resources into specialist preparing and training and are focused on their wellbeing and security. Ask each contractual worker you are thinking about the kinds of preparing specialists get and the organisation’s previous track record. Demand having your rooftop introduced by talented, experienced and well recommended specialists.

Be Careful With Roofers Without the Correct Acreditation

So there are some roofers who are proficient, and too many home and building proprietors have paid the consequences for contracting industry beginners.

This sort of administrator can be unlicensed, uninsured, and most likely ailing in involvement. He may quote a very cheap price, and “extra offers” to get your business. He may urge you to pay in real money or to issue joint checks to keep away from his expense commitments. Be careful with any such plans.

Countless property and building proprietors have been hauled into prosecution when an unlicensed roofer has made a right mess of the work required. In the event that a representative of an unlicensed company has harmed your home or building, you might need to get some sound legal advice before making any further steps.

This can be a bit of a mine field. Obviously the advice is make sure you approve of the company you instruct in the first place, a bit of due diligence when you begin solves most issues.

Kevin Westlake:

We have Problems with our Velux Window. It was installed several years ago and has always leaked. Do we need to replace the window or do you think it was installed incorrectly?

Harry:

The odds are the window was not introduced accurately in any case. The primary thing to search for if the right flashing unit has been introduced (for slate, tile different profile for tiles) .

On the off chance that it is the wrong one or has not been introduced appropriately it’s generally down to the head lap, insufficient overlap (slate flashing) or side lap (tiles). It could be conceivable that the overskirt at the highest point of the window (demonstrations like a canal) could be penetrated due to a slipped slate. It is conceivable to settle as Velux do new parts.

I’d envision it’s exceptionally uncommon yet in the event that it’s a blame with the real window and casing then Velux offer a multiyear guarantee, however just enquire once you are certain that the window has been introduced effectively.

I strongly question the likelihood of the window spilling because of a development of leaves that would mean a considerable measure of issues for velux if that was the situation. There windows are tried against a wide range of climate conditions and situations. Is the window and flashing right for the point (pitch) of the roof? (wrong blend will bring about holes) Your builder needs to check each plausibility and output the distance around the window or more to edge tallness to determine no breakages over the window.

In the event there’s a shot that moisture can work its direction into the underlay or rafters and get in where the underlay has been cut open when the window was introduced. Any of these proposals ought to be anything but difficult to comprehend. You said you utilised a builder, I don’t represent all builders ( I believe each exchange should stick to there claim) however you should ask for a survey off a trustworthy roofing organisation, a lot of experience means a ton.

Peter Makely:

We want to convert our flat roof into a Decking and Garden Area?  Is this possible and can steps from above be put down so we can access this?

Harry:

You would definitely need to get an auxiliary architect to take a gander at the roof. On the off chance that you are proposing to include a staircase and furthermore some kind of roof deck. I would figure that the original roof joists would not have the capacity to take the additional weight in a protected way. The staircase would need to be settled to the current roof deck/joist and afterward weathered with the film that you would use on the principle rooftop.

With respect to roof covering you can utilise a superior single employ pvc roofing layer to climate your roof. This would then be able to be overplayed with either a timber decking or a clearing section on supports/pebbled wrap up. The decked zone would clearly NOT be settled through the roof layer and simply sit free over the roof. The heaviness of the deck will hold it down. You would need to utilise a wool channel/insurance layer between the completed film and whatever roof deck complete that you liked. This shields the waterproofing film from getting to be harmed and furthermore goes about as a filtration layer for all the soil that would aggregate under your deck.

Phil Boorman:

When Im in the loft I have noticed that the roofing felt is in a terrible condition. It’s frayed with holes and some areas it has completely disintegrated. We do not have any problems with leaks so do we need to bother getting replaced?

Harry:

As far as we are aware there is at this moment in time no government warning on roofing felt containing asbestos or the safe handling / disposing of sarking felt due to it dangerous nature. As there is no asbestos fibre in old roofing felts, it seems to me that the felts on your roof have started to perish, best solution is to post for a quote on here and get some advice, by all means you can call us and we can provide a quotation for any works free.

the felt running into the guttering is always the first bit of felt to wear because it is exposed to all the elements, Sarking felt is the end that laps over into the guttering to allow water run-off. Over a long period of time the tiles/slate move, vibrate in the wind up and down and hit the top of the fascia board and sometimes that cuts the felt. This done it allows water penetration via wind movement to ingress to the timbers inside and you know what that mean. One of the best and secure ways of dealing with this is to replace the first 1 metre up the roof with new, this in achieved by removing the first four rows of tiles/slates and battens/ cutting away the rot and torn felt normally about 6″ lifting the rest up and installing a new length under making sure you leave enough hanging out to go into the gutter. Simply replace what tiles/slate you removed in a reversed action and re-bed in cement the ends to prevent ingress there.

A good solid solution, hope this helps with your question.

Paul Spencer

I have had my roof replaced and it is constantly Leaking, what do you advise?

I had a re-roof and have had issues continually en route. Right off the bat they didn’t do the entire roof, they missed the mark by around 2-3 feet. They at that point returned and just nailed tiles over the old slate which fortunately my neighbour saw and hailed it up to me. So then they returned and took up that bit and put new felt down and set the tiles back on. I at that point saw they had missed a similar piece out on the front. Yet behind the stack, so it wasn’t obvious to see except if you were a reasonable way back from the house, which was making it spill. I additionally had a cascade falling off the front of my home because of the flashing not going into the gutter. So they returned for a third time and clearly settled it.

 Regardless I have water spilling into both the front and back rooms and I am having no reaction from the builder. It is simply deteriorating and more terrible consistently. One of the rooms was just put in July so it is turning into a misuse of cash the more it spills.

I was trusting somebody would have the capacity to give me some guidance on what I can do? I assume my solitary alternative is to get another contractual worker in to settle the issues and endeavor to recoup the cash I have effectively paid through little cases court? Am I qualified for attempt and claim for the harms caused by the holes which have just come to fruition after they told me they had redone the whole job?

Likewise, would anyone be able to offer any exhortation on the most proficient method to get a better than average roofer. I have looked online to acquire two roofers, the first came and performed a simple repair. At that point revealed to me I required another roof. After that the second one did the most exceedingly terrible work conceivable (they both had great testimonials)

Harry:

What concerns me here is that there is no mention of building regs. As it was a re-roof building regs ought to have marked it off, it is presently compulsory that building regs are included on all roofs where more than 25% of the roof covering is supplanted or expelled and in addition all space protection is moved up to current government specs 270mm.

You should then receive compliance from building control that the work is up to scratch. You need to contact the individual you utilised and give them a reasonable time scale to adjust their deficiencies on the off chance that they neglect to go along.  At that point you could utilise another roofer however don’t be shocked if the entire roof must be taken off and re-done as it sounds a wreck yet without taking a gander at it we can’t generally tell what the problems are

In the event that the individual was an advertised contractor they should have open obligation protection for the activity they have done. While it doesn’t cover awful workmanship it will cover harm caused by the awful work i.e. water harmed ceilings, walls, this would be my first port of call, the insurance agency. Your home insurer may also be able to help.

It is reasonable to accept from what you have composed this individual who knows nothing about roofs and has most likely under-priced the job to accomplish the work. Unfortunately the low cost of the pricing likely means that shortcuts have been made. This is where problems are often found

You can take them through the small claims court however this can be frustrating, take a lot of time and money and doesn’t always work in your favour. But definitely use as the final resort.

Roofing News 2018

Here is a little catch up on all things current in the roofing industry. Its an over view on events, shows, reports and general goings on in our proud trade!

May 21^st 2018

Farnham Roofer wins “Local Hero” award at UK Roofing Ceremony

A Surrey roofing company who is owned and led by Lee Moran has been recognised for its outstanding charitable work in the community. The award came at the annual NRFC 2018 UK Roofing Awards in the “Local Hero” category which is aimed at recognising contractors who provide their community with more than just roof services. Its aim is to encourage the industry to improve its image and be associated with giving back to the local area.

Lee was presented the award at the Park Plaza Westminster Bridge Hotel by a roofing director of a company called SIG Roofing who were sponsoring the event. Mr Moran has been raising money for a charity very close to his heart the Phyllis Tuckwell Hospice, who have helped some family members with treatment for cancer.

Lee received an incredible amount of nominations for this award most of which came through the facebook group he started called “Farnham Rants”. The group has nearly 20,000 members and has raised over £10,000 for the charity so far.

Director Andrew Wakelin said “ This industry is full of excellent businesses serving the construction sector and contains lots of outstanding people like Lee who really put in effort to change the way society views the industry as a whole”

April 25^th 2018

Traditional Building Skills Trade Show proposed for Birmingham

Following the massive success of a building demonst4ration held in Glasgow, manging Director of Birmingham Roofers Harry Maguire, is trying to replicate a similar event here in Birmingham.

In Glasgow, school children, members of the general public and other youth organisations were invited to the event which had a whole array of tradespeople showing the general and basic skills often used in the building industry. Spectators were able to get their hands dirty and try out the different methods, carefully aided by apprentices in the industry.

There was a whole host of skills being showed with the aim of raising the profile of career opportunities within the construction industries. The skills demonstrated really put across the diverse nature of building including bricklaying, joinery, roof tile laying, lead work, plastering, masonry and much more.

Harry Maguire wants to encourage the youth of the city focusing more on roofing as he has struggled to find a decent volume of apprentices coming into the industry. He is hoping to join forces with the local council, the National Federation for Roofing Contractors and local colleges to put on a live show in the town centre this summer.

“I’m really hoping the building show we put on can be well supported in our community where unemployment is still rife in young people who are just not aware of the opportunities that the roofing and building industry offer. So far I have had a positive response from the council and the colleges are keen to help too. Watch this space”

March 29^th 2018

The use of Drones in the Roofing Sector

It has been an idea that drone enthusiasts have always advocated, the use of small radio controlled aircraft with a camera to complete inspections of roofs. Negating the need for scaffolding and “guess work” when providing customers with accurate quotes and inspections.

This new technology is fundamentally changing the way you can measure and survey roof jobs, solar installations, insurance quotes and so on. Drones are now safer and much more accurate than traditional methods of viewing roof damage.

Combining the ability to fly and record video with state of the art mapping and measuring technology this has taken it to the next level. Soon it will become a must for any reputable roofing contractor to have a surveyor who is trained and capable of flying these craft to carry out normal roof inspections.

The NFRC are a little bit concerned about safety as there is an art to flying these controlled “helicopters” and there are concerns that there could be a safety issue unless training procedures and possibly licenses can be put into place.

Drones are a much quicker, safer and more cost effective way of gathering information and turning it into planned procedures, data and roofing diagrams. This drone mapping does not just give you basic measurements, pitches and roof area. It can also give detailed cloud based high resolution pictures which can be instantly communicated and shared across of IT communication applications.

Many roofing companies have been trialling the use of drones and already are experiencing quicker quoting visits and much more accurate details of damage to roofs. This really proves that this industry is on the forefront of cutting edge technology and joining the likes of the farming industry in the use of radio controlled drone video capture tech.

January 2018

Green Roof Market Sees Incredible Growth

With the huge raise in awareness for the problems associated with climate change any product that helps the environment has the ability to see great success. This was recently highlighted when a recent survey showed that the green roof sector in the UK is seeing a 17% year on year growth.

The Deputy Mayor for Environment and Energy stated that in London they are supporting green infrastructure through an ease on planning policies. This has led to an increase in green roofs that help boost air quality, help the environment and encouraging more wildlife, making the city more attractive.

So there is a huge opportunity for contractors specialising in this niche to help promote the product in other cities around the UK. The country really needs a healthy green roof market if it is to adapt to the necessity for having healthy environmentally safe cities.

The continued expansion of this sector within the roofing industry really does highlight the diversity we have is important in keeping a growing career opportunities market for multi skilled professionals.

Visit HOMEPAGE

Choosing the best roofing tiles isn’t easy even for seasoned homeowners. Firstly, you have to compare different types of tiles. Secondly, the tiles come in different sizes, colors, shapes, brands and more. Thirdly, you may not know the reputation of the manufacturer. Fourthly, although you may have an idea of the best, you can have challenges distinguishing genuine pieces from fake or substandard products. Fifthly, there is so much competition in the market which may leave you more confused on which item you should actually go for. In this article, we will briefly show you how to choose the best roofing tiles.

Durability

No one wants to keep repairing or replacing the tiles because they wear out too fast or lose their beautiful appeal too soon. This is best avoided by going for the sturdiest tiles that money can buy. You will need to compare different products, read product reviews, or follow referrals.

A better approach is dealing with an experienced roofer who will guide you through the purchase. A reputable firm already knows the best types and brands and will have helped many people pick the best product. In addition to a quality product, relying on an expert saves time and effort.

Authenticity

One of the biggest challenges for most property owners is knowing if the tiles are genuine. As we know, authentic pieces will last for many decades and won’t lose their appeal. However, fake or substandard products will start warping, fading, splitting, or cracking within a short time.

You are advised to only go for genuine tiles if you want the best service. You shouldn’t sacrifice quality for economy since, in the long-run, you will spend more time and money repairing and replacing tiles due to leaks, sagging, discoloration, and more.

Material

Generally, roofing tiles are constructed from clay or concrete. The two materials have been used for decades and each comes with its specific advantages and disadvantages. For instance, clay tiles are very fire resistant, eco-friendly, durable, and come in many designs. However, they are a bit heavy and also brittle. Concrete tiles, on the other hand, are eco-friendly, durable, fire resistant, durable and more affordable than clay tiles. However, they are not as fire resistant as clay and are equally heavy.

Slope

Did you know that the slope or pitch of the roof influences the type of tiles to choose?
Some types will look better on flat or less-pitched roofs while others are better for pitched roofs. Types to be placed on a flat roof need to have better properties when it comes to redirecting rainwater and preventing leaks. Tiles to be placed on pitched roofs should remain firm and won’t move even in the strongest winds or rain.

Truss/ Frame

You shouldn’t pick any tiles just because they are well-priced or will look amazing on your home or business premises. It’s critical to first examine the truss or framework. Placing heavy tiles on a weak framing may lead to the roof sagging causing it to cave-in or leaking.

The existing framing should be able to support the tiles without problems. It’s better to call in an expert before buying the pieces since he will examine the structure to ascertain its strength. BM Roofers would be a good option for people residing in this surrounding area.

Design

Truth be told. The roof greatly influences the beauty, functionality, and value of a property. So, why would you want to ruin its worth or appearance by going for plain or average looking tiles just because they are cheap or on offer?

It’s vital to take time and compare different products while focusing on the design of the property. Some colors are known to make a property seemingly bigger while others may make it appear smaller. Some tiles are best used on modern styled homes while others are perfect for traditionally-styled homes.

Reliability

Before you install tiles on the framing, you have to ascertain that they will tolerate the weather and natural calamities. Top choices can withstand the high heat that may occur during a wildfire or inferno, low temperatures experienced in the cold climate, and also heavy rainfall. It will also withstand high wind, animal droppings, tree sap, and other harmful compounds.

Other critical issues are cost, recyclability, compliance with building codes, brand reputation, and product reviews.

Conclusion

After reading this article, finding the right roofing tiles should now be much easier. However, you may need further classification or are in need of a seasoned, reliable, and reputable roofer. How about talking to Birmingham Roofers?

The company will help you pick the best tiles that guarantee you of good long-lasting service. It stocks a wide range of products to cater for different needs and tastes. And thanks to its team of experienced roofers and experts, you are assured of the best service and maximum satisfaction.

You can take a look at the services by visiting bmroofers.co.uk, sending us an email, calling them or even visiting our premises. Talk to us for the best roofing tiles.

There are many types of roofs in the UK.

Some have been in existence for centuries whereas others are new in the market. Each type comes with its specific advantages and disadvantages and will appeal to people differently. the suitability of a roof is influenced by the region, availability of the materials, home design, trend, maintenance ease and much more influence Whichever your choice, it is important to pick the best type that is functional, durable, easy to maintain, and affordable. The following are the popular types on the market.

Flat Roofing

This roof comes with a flat surface. It has no ridges in between and is among the easiest to install. One of the sides is slightly raised to allow rainwater to flow from one end to the other and finally into the gutter and downspout. It is mostly fitted on small areas since it has a limited beam and rafter support. The roofing materials comprise of a bituminous felt, concrete, and iron sheets. Advantages of this roofing type are the simple installation, affordability, and space saving.

Pitched Roof

The pitched rope is also known as the sloped roof. It comes in a high or low pitch with the former having a pitch angle of less than 20 degrees while the later can have an inclination angle up to 70 degrees. The more pitched the roof the more materials required to construct it and the more efficient it is in redirecting water and preventing stagnant points. A qualified Birmingham roofer will first analyse the property design to come up with the best pitch of a new installation or complete overhaul.

Gable Roof

This is a type of pitched roof and comprises two sections linked with a ridge. One side is longer and slopes inwards and also has a sidewall with a gable (a triangular shaped top section). When viewed from the side angle, you will only see the fascia and side walls, not the roof. It is also a popular choice and will be seen in homes, offices, warehouses, godowns, and other replaces. Consumers love it because it is easy to install, suitable for many places, and can last for many bears when installed properly.

Hip Roof

This roofing type is almost similar to the gable roof. However, it lacks a sidewall, flank or gable and in its place, you will find a longer roof section. The roof will have four parts rather than the two that are found on the gable type and includes a ridge. Due to the more sections and complex design, construction or repairing this roof is a little challenging than the gable roof. Nonetheless, a good roofer in Birmingham should be able to handle it without a problem.

Gambrel Roof

Usually, a pitched roof has two sloping sides. However, the gambrel type has four sides, two on each side. The roof has a vertical gable on each end and is liked because of its classic styling and aesthetic appeal. It’s, however, more complicated to install compared to the flat, gable, or pitched roof. It also requires more materials, a stronger support, and occupies more space. The roof can be seen in many old houses.

Mansard Roof

The mansard roof is also called the French roof and was very popular since the 16th century. It was popularized by the French and is still common even today. It resembles the gambrel roof and has two pitched sections on each side of the roof. The two sides connect to each other via a ridge and give it for sections. While the gambrel roof is plain, the Mansard will have an attic(s) and windows to take advantage of the large spaces inside the roof section.

Conclusion

If you want to install new roofing, overhaul an existing one, replace or repair a section, you need to talk to the experts. Birmingham roofers have installed many types of roofing in the region and beyond .the firm also undertakes roof assessment, repairs, and replacement and has been in operation for many years. It comprises a team of skilled and trustworthy individuals and has invested in the latest technologies. The firm is reachable via the website, email, social media and via phone. Talk to the experts and have a stress-free roofing experience.

http://bmroofers.co.uk

A good roof can last for as many as 30 years. However, if you don’t give it the necessary maintenance, you’ll be repairing or even replacing it sooner-rather-than-later. And as we all know, roofing repairs in Birmingham and in the UK, in general, can be quite costly. It may be a leaking roof, a few missing tiles, crooked or misalignment, damaged fascias, worn out soffits, mold or moss, losing heat and much more. The following are ways of maintaining the roof:

1. Periodic inspection

Regularly inspecting the roof will help to extend its life. You may notice that the water isn’t flowing right because of debris blocking the gutters, a few tiles may be loose or are faded more than the others and this may be due to misalignment, or the paint on the soffit or fascia may be flaking. Early detection helps to arrest a problem before it gets out of hand. Areas that need to be looked at include gutters, fascias, soffits, vent pipes, and flashing.

2. Clearing debris

Stuck leaves, grass clippings, gravel, bird’s dropping have a negative effect on the roof. They may interfere with the flow of water meaning it stays on longer and may cause rot. The acidic content in the tree sap, bird dropping, leaves or acid rain may start corroding or staining the roof or the debris may interfere with flow and cause water to splash against the soffit or fascia. Regular cleaning helps to eliminate the debris. Due to the risk of slipping or the ladder skidding, it is recommended to deal with a competent roofer in Birmingham.

3. Examine the loft or attic

Some problems are easier to spot when in the attic or loft. These include a damp roof, loose insulation, sagging beams/rafters, moss, and mold. Accessing the attic will help stop a problem from getting worse. A better approach is seeking professional help since they will carefully go through the entire roof and will provide the best solution. It may be a simple cleaning job, debris removal, applying a sealant, or more complex task like replacing a rotted or faded section.

4. Regular Maintenance schedule

Some roofing problems may not be visible and may require special skills or tools. For instance, loose or worn out insulation, mold or dampness beneath the roof, rooting beams, rot and much more. Scheduling periodic inspections with a Birmingham roofer helps to pinpoint such problems. The provider will rely on many years of experience and specialised tools to not only detect but also eliminate the problem. This may entail scraping the moss or mildew, clearing the debris, replacing the insulation, or applying a sealant or protectant.

Maintaining your roof doesn’t need to be a difficult task. You don’t need to take risks scaling the roof and risking falling? Also, you shouldn’t depend on an inexperienced professional to undertake the repairs. At Birmingham Roofers, we specialize in roofing maintenance and repairs and can handle any kind of roof. We have been doing this for many years and pride on a competent and experienced team of professionals who ensure you get the best. Give us a call or visit our website to learn more about our services.